Types of Gating for Injection Molding
There are several types of gate designs. The following post shows each one of these designs and it’s purpose in the injection molding process.
There are several types of gate designs. The following post shows each one of these designs and it’s purpose in the injection molding process.
This part is a molded filter has .03 inch openings. Basilius is able to achieve optimum quality using an integrated machine vision system
Use this guide to help decide if you should keep repairing an old mold or replace it all together.
Injection molds can have complicated parting lines and can wear over time or be easily damaged.
Injection mold gates are exposed to extremely high speed plastic on each molding cycle. Learn how gates are repaired or replaced.
Learn more about common wear areas on mold ejection systems and how they are repaired.
Designing your part correctly for the overmolding process is critical. That design process starts with understanding the function of the part.
A guided ejection system is a means of supporting the weight of the entire ejection system while it’s actuated by a molding machine or a hydraulic system.
How injection molded parts are handled after molding has design implications for the mold build. This guide will help you understand those implications.
Basilius Inc. has a history going back to the early 1950s. This is a story of how we got started and how we ended up where we are today.
© 2023 Basilius. All Rights Reserved.